ONCP Setup Requirements

Manufacturer

Port & Requirements

Fujifilm
  • ONCP installation and uninstallation occur from the Service Client object to the printer over TCP 50200.
  • It is required that embedded plug-ins be enabled.
  • Normal printing communication occurs from the workstation to the printer over TCP 9100.

Fuji Xerox
  • ONCP installation and uninstallation occur from the Service Client object to the printer over TCP 443 and TCP 50200.
  • The Controller ROM (firmware) must be version 1.60.4 or higher.
  • It is required that embedded plug-ins be enabled.
  • Normal printing communication occurs from the workstation to the printer over TCP 9100.

HP

  • HP requires a specific installation procedure. Ensure you follow the steps outlined in the HP - Off-Network Cloud Printing (ONCP) topic.
  • ONCP installation and uninstallation occur from the Service Client object to the printer over TCP 443.
  • Normal printing communication occurs from the workstation to the printer over TCP 9100.
  • The HP Workpath platform must be enabled for ONCP to install correctly.
  • After installation, open the ONCP app on the printer to establish the web socket connection.

Kyocera

  • ONCP installation and uninstallation occur from the Service Client object to the printer over TCP 8083, TCP 9091 and TCP 9090.

  • Normal printing communication occurs from the workstation to the printer over TCP 9100.

  • The following settings must also be enabled on the MFP:

    • SSL/TLS.

    • Enhanced WSD.

    • Enhanced WSD over SSL.

Lexmark

  • ONCP installation and uninstallation occur from the Service Client object to the printer over TCP 80/443.

  • Normal printing communication occurs from the workstation to the printer over TCP 9100.

Ricoh

  • ONCP installation and uninstallation occur from the Service Client object to the printer over TCP 443.

  • Normal printing communication occurs from the workstation to the printer over TCP 9100.